D01-A/D01-B style products are introduced as follows:

This product cannot be connected to the Internet, stand-alone version

Integrated Doorbell:After pressing the doorbell key, the screen will automatically light up.

Night Vision:Night Vision Supported by Two Infrared Lights.

Internet or Wi-Fi is not required:This product is able to operate without Internet or Wi-Fi.

Economical Cost of Use:The standby duration is up to 180 days, which can save money of replacing the batteries.

**Batteries not included in the set.

Screen and Camera:2.8 inch Color LCD Screen with 320*240 Resolution 90° Wide-Angle Camera Sensor.

Easy to Install and Broad Applicability:Applicable Door Hole Diameter: 14-22mm Applicable Door Thickness: 35-120mm

Internal Memory:Up to 92 photos can be stored in the internal memory.

Kindly note: The photos will be stored cyclically. When the internal memory is full, the new photo will cover the oldest one.

One-Click to Photograph:Press the Power Key to take a photo.

How to install this product?

Step 1, Screw the screw suitable for the thickness of your door into the column on the camera unit.

Step 2, Remove the protective film of the double-sided adhesive tape on the back of the camera. Then paste the camera unit to the door and make the column through the door hole.

Step 3, Lead the FPC cable through the hole in the center of the metal bracket. Then tighten the screws through the hole next to the FPC cable hole to fix the metal bracket on the other side of the door.

Step 4, Put 4 pcs AAA batteries into the battery compartment of the monitor.

Step 5, Connect the FPC cable to the socket on the back of the monitor. And hang the monitor on the metal bracket.

Got everything?

1 X Outdoor Unit

1 X Indoor Unit

1 X Metal Bracket

3 X Screws

1 X User Manual